Juniper SA4500 SSL VPN Manual download pdf (Page 13)

APPLICATION NOTE - VMware View with Juniper Networks SA Series SSL VPN Appliances

Once the VMware View client is launched, it needs a way to forward the Remote Desktop Protocol (RDP) traffic to the

backend virtual desktop instance. To facilitate this, either the NC or WSAM feature may be used, either of which is probably

already in use by the remote access users. If users do not have either of these access methods assigned to them, the

administrator will have to decide which one is most appropriate for a given role and then assign that feature accordingly.

Network Connect

For NC configurations, the following elements are required:

• Enable Network Connect at the user’s role level.

• Configure desired NC split tunneling role options.

• Configure the NC connection profile and IP pool to use.

• Configure NC access control lists (ACLs) in order to allow access to the View Server and optionally the backend

virtual machines (if Direct Connect is enabled).

WSAM

WSAM can work in application mode if View Connection Server is configured with either tunnel or non-tunnel mode.

WSAM in server mode will work only if VMware View is configured in non-tunnel mode. Only one WSAM mode is

required, although both may be used.

1 2 ... 8 9 10 11 12 13 14 15 16

No comments

Juniper SA4500 SSL VPN Manual Page 13